3LT® Lasers
Worlds most researched 3LT® Lasers!
PL 5000
Erchonia's patent-pending line of 3LT® Lasers is headed up by the PL5000. Completely redesigned to reflect the features and functions requested by the doctors and practitioners that have been using Erchonia 3LT® Lasers to treat their patients since 1996.
The PL5000 is a variable frequency, four diode laser that is encased in a custom designed, aircraft quality aluminum housing to resist the rigors of daily use in the real world. Ergonomically designed to fit hands of all sizes, the dual-diode head, conveniently clips to the side of the laser when not in use, which increases security and prevents accidental ocular exposure to both patient and doctor.
About the only mechanical piece on the PL5000 is the lock and key that enables the owner to prevent the unauthorized use of the laser.
- Configuration: Dual Probe, Four Diodes
- Diodes: (4) 5 milliWatt
- Wavelength: 635 nm
- Frequency: Variable from 1hz - 10,000hz
- Capable of up to ten (10) presets
- Programmable decimal point frequencies.
- Enter four frequencies simultaneously.
- Weight: 3.1 lbs
- Material: Machined Billet Aluminum Enclosure, Powder Coated for Durability and Ease of Cleaning
- Hydro formed Membrane Switch ESD Shielded Hard-coated Polyester Design for Ease of Cleaning
- Backlit Liquid Crystal Display (LCD)
- Power Source: Nickel Metal Hydride (NiMH) rechargeable battery
- Process and Machine Patented US Patent No. (6,605,079B2; 6,013,096; 6,746,473)
- Certified in accordance to:
- ISO 9000 Quality Standards
- ISO 13485 Medical Device Standards
- FDA Good Manufacturing Practices
- Approved Testing:
- IEC 60601-1-2
- MDD 93/42/EEC
- EN4600
- IEC60825-1 Laser Safety
- Accessories Included: Battery Charger, Protective Carrying Case
- Warranty: Full Two Year Warranty
PL 3000 
The PL3000 is a variable frequency (1hz-1,000hz), single diode 3LT® 635nm wavelength laser that is encased in a ergonomically designed, machine billet aluminum housing to resist the rigors of daily use in the real world. Designed to fit hands of all sizes, the single-diode head, conveniently clips to the side of the laser when not in use, which increases security and prevents accidental occular exposure to both patient and doctor.
- Configuration: Single Diode
- Diode: 5 milliWatt
- Wavelength: 635 nm
- Frequency: Variable from 1hz - 1,000hz
- Weight: 3.1 lbs
- Material: Machine Billet Aluminum
- Battery: Nickel Metal Hydride
- Process and Machine Patented US Patent No. (6,605,079B2; 6,013,096; 6,746,473)
- Certified in accordance to:
- ISO 9000 Quality Standards
- ISO 13485 Medical Device Standards
- FDA Good Manufacturing Practices
- Approved Testing:
- IEC 60601-1-2
- MDD 93/42/EEC
- EN4600
- IEC60825-1 Laser Safety
- Accessories Included: Battery Charger and Protective Carrying Case.
- Warranty: Full Two Year Warranty
Base Station™
Not only was Erchonia the first Low Level Laser to receive 510(k) market clearance from the FDA for Chronic Pain, Laser Assisted Liposuction, and now the treatment of Acne. Erchonia is now offering all three lasers in one conveinient unit. The Base Station™ is a perfect solution for the multiple room clinic. It is a patented, desk top model; that houses three separate, cordelss, hand held units,
All three units are programmed from one control station (the base) and operate independently, powered by their own internal battery source. This is the ultimate in ergonomics, space savings and portability.
- Configuration: (3) Complete laser devices, one control station
- Lasers:
- 1 - Class 3a (635nm) - (2) 5 milliWatt Diodes
- 1 - Class 3b (635nm) - (2) 7.5 milliWatt Diodes
- 1 - Class 3a (405nm) - (2) 5 milliWatt
- Wavelength: 635 nm, 405nm
- Frequency: Variable from 1hz - 50,000hz
- Capable of up to twenty (20) presets
- Weight: Unit with Probes 7.45 lbs. Probes .75 lbs each
- Material: Fire rate, high impact PC/ABS
- Battery: Rechareable Lithiom-Ion
- Power Source: 110/220VAC
- Process and Machine Patented US Patent No. (6,605,079B2; 6,013,096; 6,746,473)
- Certified in accordance to:
- ISO 9000 Quality Standards
- ISO 13485 Medical Device Standards
- FDA Good Manufacturing Practices
- Approved Testing:
- IEC 60601-1-2
- MDD 93/42/EEC
- EN4600
- IEC60825-1 Laser Safety
- Accessories Included: Battery Charger and Protective Carrying Case
- Warranty: Full Two Year Warranty
LipoLASER™
Erchonia's patented line of 3LT® Lasers now includes the FIRST and ONLY Low Level Laser (3LT®) to be given FDA market clearance for use during liposuction - the Erchonia LipoLASER™..
The painless laser treatment is administered a few minutes prior to liposuction and works by liquefying the fat. As a result, fat removal is made easier and quicker. There is less post-op pain and bruising and a speedier recovery time. In addition less pain medication is required.
We received market clearance on the LipoLASER™ based on the results of an IRB approved, multi-center, double blind, randomized study. The comparison between the actively treated patients and the placebo-treated patients resulted in an impressive difference between groups in degree of pain. Significant differences in emulsification of fat, ease of extraction, and amount of swelling were also recorded.
"This approval is a major step forward in our goal to establish the Erchonia LipoLASER™ as the future of liposuction," comments Charlie Shanks, VP of Sales and Marketing for Erchonia Medical. "We believe that eventually patients will demand laser-assisted liposuction over traditional methods because of the amazing post-operative benefits."
- FIRST and ONLY Low Level Laser given FDA market clearance for use during liposuction
- Configuration: Dual Diode
- Diodes: (2) 7.5 milliWatt
- Wavelength: 635 nm
- Frequency: Variable from Constant wave (CW) - 10,000hz
- Capable of up to ten (10) presets
- Enter up to four (4) Frequencies at once
- Pre-programmed Lipo Setting
- Weight: 3.05 lbs
- Material: Machined Billet Aluminum Enclosure, Powder Coated for Durability and Ease of Cleaning
- Hydro formed Membrane Switch ESD Shielded Hard-coated Polyester Design for Ease of Cleaning
- Backlit Liquid Crystal Display (LCD)
- Power Source: Nickel Metal Hydride (NiMH) rechargeable battery
- Process and Machine Patented US Patent No. (6,605,079B2; 6,013,096; 6,746,473)
- Certified in accordance to:
- ISO 9000 Quality Standards
- ISO 13485 Medical Device Standards
- FDA Good Manufacturing Practices
- Approved Testing:
- IEC 60601-1-2
- MDD 93/42/EEC
- EN4600
- IEC60825-1 Laser Safety
- Accessories Included: Battery Charger, Laser Safety Glasses, and Protective Carring Case.
- Warranty: Full Two Year Warranty
DermaLASER™ 
The Erchonia DermaLASER™ is the FIRST and ONLY Low Level Laser (3LT®) to be given FDA market clearance for the treatment of acne.
The Erchonia DermaLASER™ is a low-level, or cold, laser that works by killing the bacteria P. Acnes that causes acne. Unlike current acne-laser treatments, the Erchonia DermaLASER™ is not high density, or hot, so it does not irritate or adversely affect the healthy skin cells. The Erchonia DermaLASER™ targets only the acne-causing bacteria itself, not the skin, so it effectively treats the cause of acne at its root.
Up until now, people with acne have had to rely on strong antibiotic treatments lasting several months, harsh topical ointments that can irritate and severely dry out the skin or hot lasers that cause redness and pain. 30 years of research shows that side affects from low-level laser treatments of all kinds are minimal to non-existent and the DermaLASER™ is no exception.
"This FDA market clearance is a major step forward in the fight against acne and the misery it causes teens and adults alike," comments Charlie Shanks, VP of Sales and Marketing for Erchonia Medical. "For the first time it is possible to painlessly and quickly treat the root causes of acne, instead of the usual symptomatic treatments of messy ointments and creams."
- Configuration: Dual Diode
- Diodes: (2) 5 milliWatt 405nm/635nm
- Wavelength: 405nm & 635nm
- Frequency: Variable from Constant wave (CW) - 10,000hz
- Capable of up to ten (10) presets
- Enter up to four (4) Frequencies at once
- Pre-programmed Acne Setting
- Weight: 3.05 lbs
- Material: Machined Billet Aluminum Enclosure, Powder Coated for Durability and Ease of Cleaning
- Hydro formed Membrane Switch ESD Shielded Hard-coated Polyester Design for Ease of Cleaning
- Backlit Liquid Crystal Display (LCD)
- Power Source: Nickel Metal Hydride (NiMH) rechargeable battery
- Process and Machine Patented US Patent No. (6,605,079B2; 6,013,096; 6,746,473)
- Certified in accordance to:
- ISO 9000 Quality Standards
- ISO 13485 Medical Device Standards
- FDA Good Manufacturing Practices
- Approved Testing:
- IEC 60601-1-2
- MDD 93/42/EEC
- EN4600
- IEC60825-1 Laser Safety
- Accessories Included: Battery Charger, Laser Safety Glasses, and Protective Carrying Case.
- Warranty: Full Two Year Warranty
